Do you supply systems nationwide and globally?
At Aqua Blast, we’ve built systems for customers in all 50 states, as well as Australia and China. We’re happy to work with customers throughout the country and around the globe.

What power sources do your systems use?
We can build pressure washing systems that use any power source—including diesel, gas and electric. It all depends on how you work and what you prefer. We also work with many different engine and pump manufacturers, so if you have a brand preference, let us know.

How do I determine what PSI I need?
When selecting PSI, the most important thing to consider is the task at hand. What are you cleaning and what kind of dirt and grime is typically stuck to it? Our pressure washing experts can help you find the PSI range that best suits the job.

Does PSI make a difference?
PSI measure pressure, which is part of the cleaning equation. The other major factor to measure is water supply and water volume over time, which can make a big difference in the effectiveness of a system. The best pressure washing systems should be able to fill a five-gallon bucket in under a minute.

How much hose comes with a system? Will lengthening the hose affect PSI?
Our systems are typically built with at least 50 feet of hose—but we can always customize hose length. Let us know how you use your system and we’ll make sure you have the hose to match. Over the years, we’ve built systems with extremely long hose lengths. In our experience, hose length does not have a measurable negative impact on PSI.

Do you make hot water pressure washers?
We build both cold- and hot-water pressure washing systems. It all depends on what you need to get the job done. Our hot-water systems harness the power of heat to cut through grease and grime.

How do I know that your equipment will get the job done?
Before we begin building your system, we ask a lot of questions. We want to find out exactly how you will use a pressure washing system—down to the details of each task—so we can determine what kind of features you need. During our development process, we’ll even go onsite to see how you work and test our systems in the elements, against real-world challenges. Our design and development process gives you a pressure washing system that’s built to get the job done—no matter what.

Do you offer set up and training?
Once your new pressure washing system arrives onsite, we’ll show you how to use it. If needed, we can also offer additional set up and staff training.